Please use the below DSC Quick Reference Guide as a resource to assist you with your DSC alarm system. You can also find alarm user manuals with more detail on the alarm user panel page. If you have an immediate need or problem, please give our customer service department a call for assistance.
Arm
- Check to see all zones are closed.
- Check for green ready light.
- Enter your 4 digit security code.
- Red armed light should illuminate.
Disarm
- Enter using the entry / exit or delay door.
- The keypad will sound an audible remind tone.
- Enter your 4 digit security code.
- Green ready light should illuminate.
Stay (Residential Use Only)
- Press the stay button for approx. 2 seconds
- It should give you an audible beep. Armed & bypass lights should illuminate.
- Bypass indicates motion devices are bypassed.
- Perimeter devices have been armed.
Away (Residential Use Only)
- Press the away button for approx. 2 seconds
- The keypad will provide an audible beep when activated.
- ALL zones have been armed.
- Red armed light should illuminate.
Chime
- Activate door chime feature by pressing the chime button for approx. 2 seconds or until keypad beeps 3 times.
- Doors will chime when opened and closed.
- Deactivate door chime feature by pressing the chime button for approx. 2 seconds or until keypad beeps 1 steady tone.
Exit
-Pressing the Exit button until keypad beeps will allow you to exit thru an Entry / Exit door without disarming.
- After you have exited the system will return to the previously armed state.
Fire (Flame Symbol) – Use for Dispatch of fire department
-Press both Fire keys simultaneously for 2 seconds to send a fire alarm.
Audible alarm.
Panic (! Symbol) -Use for Dispatch of police
- Press both ! Panic buttons simultaneously for 2 seconds to send a silent panic alarm.
Silent alarm.
Police (Badge Symbol) -Use for Dispatch of police department.
- Press both buttons simultaneously for 2 seconds to send an audible panic alarm.
Audible alarm.
Trouble Light
- When the yellow light is illuminated use the following steps for trouble shooting.
1. Press * 2
2. Note which zone light comes on
3. Press # key to silence keypad if beeping.
4. Call service department for assistance. 618-394-1144
Memory Light
- System has been violated while armed.
- Call service department for assistance.
- If service is not required the memory light will go out after normal arming and disarming of the system.
Reset Key
- Reset is used only in the event your fire system has tripped and needs to be reset.
- The trouble light will be illuminated, please call service to verify trouble status before using the reset key.
# Key
- If you are having difficulty arming the system press the # key and re-enter your alarm code.
- The # key acts as a clear entry function for your system.